Hino Diagnostic eXplorer DX2 188.8.131.52 Diagnostic Software
Update:01.2021 Size:810 Mb Region: All regions Type:Diagnosis, reprogramming, Customization, Simulation Language: English, Spanish, Italian, German, French OS: Win Xp, Win 7, Win 8, Win 10 Instructions:Present Installation:Full Amount of disks:1 .rar file Version DX2:v184.108.40.206 Version DB:v220.127.116.11 High speed download link
The HINO Diagnostic eXplorer DX2 is a tool equipped with all the functions needed to diagnose trouble, check functions, and configure the settings of the electronic systems built into HINO engines.
This tool covers the following markets – US markets. USA, Japan, Russia and others. – RUS, DEF, JPN, USA. UU., CAN, AUS, CHN, ESP, NZL, COL, CHL, HKG, TN, GBR, IRL, SGP, THA.
Main functions – Acquires and deletes trouble data. – Warps the trouble codes read from the ECU to workflow sequences corresponding diagnostic and directly displays the required data diagnosis. – obtains conditions when vehicle sensor problems (freeze frame function) occur. – Monitors the sensors and actuators equipped on the engine (monitor function data) and test the operation of the solenoid valves to force operating them (Active Test function). – Simulates diagnostic work with only a PC (Simulation function). – Automatically saves the data from the ECU and analyzes the problems based on the stored data even when you can not understand the cause of the problems.
Full customization capability
– Turn the system off Motor protection – Set the maximum vehicle speed – Set the maximum speed cruise control – Set idle speeds of fixed and variable TDF – Change Injector Calibration QR Code when replacing injectors – the supply pump relearning when replacing SCV or supply pump – complete test capability and regeneration of the DPF – Help menus built for troubleshooting specific diagnostics
Use an interface (I/F) conforming to the SAE J2534 (pass-thru) standard and J2534-1.
• DENSO DST-i (recommended)
• Other I/F conforming to SAE J2534 and SAE J2534-1 Pay attention to the allowable input voltage.
The recommended none-OEM interface adapter is Nexiq USB-Link™.
Program runs on Windows XP/ 7 / 8 /8.1 /10. In the case of Windows 8.1 and later you can face the problem with diagnostic tool driver installation and initialization