Skip to product information

EFILive Software v8.3.38 latest update


EFILive Software v8.3.38 latest update



Support cable flashscan : V2 V3
Version : V8.3.38
GM Tuning
Pro Tuning
Dodge Cummins Tuning
Cummins HD Tuning
Unlimited credits

What's New ?

EFILive Release Notes
Version Numbers
EFILive Software

FlashScan/AutoCal V3
Firmware: V3.00.106
Boot Block: V3.00.006

FlashScan/AutoCal V2
Firmware: V2.08.194
Boot Block: V2.08.009

EFILive V8 Software

Fixed fault when reading E35 (LBZ/LMM) controllers that would result in an "Index Out of Range" error.

FlashScan/AutoCal V3 Firmware
No changes.

FlashScan/AutoCal V2 Firmware
No changes.
Calibration Updates
Added editing support for CM2350A operating system: 23701862.
Added editing support for E80 operating system: 12707638.

Documentation Updates

Limitation #1: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However, the DMA PIDs may no longer return valid data.
Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

Limitation #2: When opening CMF (CM2450B) Cummins 2022 tune files, the EFILive software will complain with the following message:
EFILive cannot determine some OS specific data.
Most likely because the data is from a controller that has
not yet been added to the EFILive software.

That is expected and the message may be ignored. We have only added the option to open CMF 2022 stock files so that EFILive can flash stock files. EFILive cannot be used to update the check sums of modified files. Modified files cannot be flashed. You do not need to email the file to EFILive.

Ignore the message if you are opening and flashing a 100% stock tune file. Do not attempt to flash a modified file, it will fail at the end of the flash and the vehicle will be left in a no-start condition until a stock file is flashed in.
Workaround: None.
Known Issues:None.