Skip to product information
Scania Diagnos & Programmer 3 SDP3 v2.45.1 no Dongle - 808TRUCK
Scania Diagnos & Programmer 3 SDP3 v2.45.1 no Dongle - 808TRUCK

Scania Diagnos & Programmer 3 SDP3 v2.45.1 no Dongle



Update: 2020
Size: 867 Mb – 2.39 Gb After install
Region: All regions
Type: Diagnostic & programmer tool
Language: English, Hungarian, Dutch, Danish, Spanish, Italian, Chinese, Mexican, German, Norwegian, Polish, Russian, Turkish, French, Czech, Swedish, Japanese
OS: Win Xp, Vista, Win 7, Win 10
Instructions: Present
Installation: Full
Version: v2.45.1
High speed download link

Scania Diagnostic y Programmer SDP3 v2.44.5 is a dealer-level diagnostic program for Scania trucks and buses.

It works with VCI2/VCI3 scanners (original or copy) and performs all the necessary jobs for Scania dealership diagnostics and maintainance.

ATTENTION for the VCI2 adapter owners: Your device firmware needs to be updated to use the latest SDP3 software. This is performed automatically by SDP3, but some cheaper chinese adapters fail to update. They can work only with old software versions.

Windows 10 is not recommended because some of it’s releases does not support .Net Framework 4.7 that is needed to run SDP. If you are using Windows 10 make sure that .Net Framework 4.7 can be installed before bidding!
Recommended operating system: Windows 7 (the most stable – Scania dealerships use this OS)

Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication.

Highest level access
Internal Scania
Industry & Marine
Authorized Scania Workshops

Scania SDP3 Features:

Check and adjustements

Fault Codes
Fault Reporting
Programming of Control units

Release notes:

The program supports the following vehicles:
L, P, G, R and S series (2016-)
P, G, R and T series (2003-)
F, K and N series
as well as the following engines:

Need Netframework 4.5 installed on system. windows 7 or 8 will be better.
In order to install SDP3, administrator rights are required.
Note:The VCI must not be connected to the computer during the installation of SDP3, especially not if SDP3 is installed for the first time