-FREE FOR SILVER MEMBERS
Diamond Logic Builder 12.2017 (DLB) provides high performance diagnostics for electrical systems in international trucks and high performance IC buses. DLB Fleet displays vehicle signals in graphic and text format. This software also reads and displays the vehicle’s diagnostic trouble codes, as well as the vehicle’s characteristics and parameters.
International Diamond Logic Builder (DLB)  Level 3 All options are open, all parameters are editable
NOTE: The new version of DLB runs on Windows 10. The previous version of DLB that was previously sold on a CD and that is not an updated version will not run on Windows 10. If you still have the previous version, we recommend that you buy The new license of the latest version of DLB to work correctly in Windows 10.
NEXIQ ™ Technologies – USB-Link2
Dearborn Group Technologies – DPA 5
Noregon® Systems, Inc. – DLA +, DLA + Wireless
Recommended interface cables:
– NEXIQ Technologies – Link-2
– Dearborn Group Technologies – DPA 5
– Noregon Systems, Inc. – DLA, DLA USB
Communication link controllers:
DLB uses RP1210A standard controllers for communication. The controllers are specific to the communications device and are not installed with DLB.
Diamond Logic Builder has different levels of permissions in levels that allow a more advanced use of the software.
Level 1 (Diagnosis): L1 is included with the active product key.
Level 2 (Diagnosis and programming of parameters): access to L2 requires the completion of web-based training for each user.
Level 3 (Diagnosis, Parameter Programming and Advanced Logic): Access to L3 requires that the Led Instructor training be completed for each user.
You do not need a CYY or DYY account; We have taken care of it and yours is just to enjoy the software.
All options are open, all parameters are editable.
Navistar® Engine Diagnostics is a diagnostic and programming service tool for Navistar® Engines. Navistar Engine Diagnostics, a full-featured PC application, is designed to meet the wide range of service diagnostic challenges of a mixed truck fleet. Coverage includes all J1939 international electronic engine systems. It allows you to monitor the control system, recover diagnostic trouble codes (DTCs), change parameters, view and plot engine data, and perform specialized service compartment tests on all after-treatment systems and engines. The application also has regular updates, which guarantee the most up-to-date coverage.
– Control of the control system
– Play instant recordings
– Problem diagnosis codes
– Retrieve, View, Delete
– HD-OBD Freeze Frame Data
– HD-OBD monitors
– Monitor the results
– Preparation for diagnosis
– Monitor the performance ratio
– View, save print
– Service Bay Tests
– key on, engine off
– Actuator tests
– Intermittent fault sensor
– Cold start test
– Engine running
– Air management test
– Cylinder cutting test
– Engine fan test (if equipped)
– High pressure pump test
– Post-treatment system tests
– Calibration of the sensor
– Replacements of parts
– Programmable parameters
– Motor characteristics settings
– See Programming
– Change Programming
– Restoration of the service interval
Needs: One or more communication devices compatible with RP1210A with SAE J1708 and / or SAE J1939.
NOTE: Be sure to close Navistar Engine Diagnostics before installing a new version.