
1- International Navistar Engine Diagnostics NED 2018 for Many PC
Navistar-Engine Diagnostics is a diagnostic and programming service tool for Navistar-Engines. A full-featured PC application, Navistar-Engine Diagnostics is designed to meet the wide range of diagnostic challenges of servicing a mixed truck fleet. Coverage includes all J1939 International electronic engine systems. It allows you to monitor the control system, retrieve diagnostic trouble codes (DTC), change parameters, view and graph engine data, and run specialized service bay testing on all engine and aftertreatment systems. The application also features period updates, ensuring you the most up-to-date coverage.
Software Capabilities:
Control System Monitoring
View
Record
Save
Playing Snapshot Recordings
Diagnostic Trouble Codes
Retrieve, View, Clear
HD-OBD Freeze Frame Data
HD-OBD Monitors
Monitor Results
Diagnostic Readiness
Monitor Performance Ratio
View, Save Print
Service Bay Tests
Key On, Engine Off
Actuator Tests
Sensor Intermittent Faults
Cold Start Test
Engine Running
Air Management Test
Cylinder Cutout Test
Engine Fan Test (If Equip)
High Pressure Pump Test
Aftertreatment System Tests
Procedures
Sensor Calibrating
Part Replacement Resets
Programmable Parameters
Engine Feature settings
View Programming
Change Programming
Service Interval Reset
Minimum System Requirements:
System: Windows Vista, 7, 8, 10 32bit or 64bit
1GHz Intel Core 2 Duo, AMD Athlon X2 or better
More than 2GB of RAM
More than 300MB of available hard disk space
1024 x 768 pixel monitor or better
One or more RP1210A compatible communication devices with SAE J1708 and/or SAE J1939 support
NOTE: Make sure to close Navistar Engine Diagnostics before installing a new version
Recommended Interface Cables:
NEXIQ Technologies – Link-2
Dearborn Group Technologies – DPA 5
Noregon Systems, Inc. – DLA, DLA USB
Simulate Engine Support:
for Pre-MaxxForce Engines:
3 Box I6(1994-1997)
3 Box I8(1994-1997)
DLC I6(1998-2004)
DLC I8(1998-2004)
DLCII I6(2004-2006)
DLCII V6(2005-2006)
DLCII V8(2002-2006)
for North American Engines:
MaxxForce 5(2007-2009)
MaxxForce 7(2007-2009)
MaxxForce 7(2010-2012)
MaxxForce 7(2013 - 2017 )
MaxxForce DT/9/10(2007-2009)
MaxxForce DT/9/10(2010-2012)
MaxxForce DT/9/10(2013- 2017)
MaxxForce 11/13(2008-2009)
MaxxForce 11/13(2010-2012)
MaxxForce 13(2013)
MaxxForce 15(2011-2012)
for SCR Engines:
N13 SCR(2013-2014)
N9/N10 SCR(2014-2017 )
N13 SCR(2015-2017 )
International A26 (2017)
for Global Engines:
MaxxForce 3.0H(Euro III - P418V50)
DLCII I6 for Export(2007-2017 )
MaxxForce 7.2/4.8H(Euro III - P625V13)
MaxxForce 7.2/4.8H(Euro IV - P800V24)
MaxxForce 7.2/4.8H(Euro IV - P800V32)
MaxxForce 7.2/4.8H(Euro V - P1090V52)
MaxxForce 3.2H(Euro III)
MaxxForce 3.2H(Euro IV)
MaxxForce 3.2H(Euro V)
M13(Euro V)
for Military Engines:
MaxxForce 12.4D
for CAT Engines:
CAT CT11/13(2010-2012)
CAT CT15
CAT CT13(2013)
CAT CT13 SCR(2013-2014)
CAT CT13 SCR(2015-2017 )
for Perkins Enines:
1306-E87
1606-E93
for Engineering Engines:
Simulated J1939 Engine
Simulated J1708 Engine
for JND Engine:
MaxxForce 3.2H(Euro IV)
MaxxForce 7.2/4.8(Euro V - P1090V52)
J1939 support engines:
MaxxForce 5 (2007-2009)
MaxxForce 7 (2007-2009)
MaxxForce 7 (2010-2012)
MaxxForce 7 (2013-2017)
MaxxForce DT, 9, 10 (2007-2009)
MaxxForce DT, 9, 10 (2010-2012)
MaxxForce DT, 9, 10 (2013)
MaxxForce 11, 13 (2008-2009)
MaxxForce 11, 13 (2010-2013)
MaxxForce 15 (2010-2013)
N9, N10 SCR (2014-2017)
N13 SCR (2013-2014)
N13 SCR (2015-2017)
International A26 SCR (2017)
2- International Diamond Logic Builder (DLB) Level(3) 2018 All Options are Actived
Diamond Logic® Builder (DLB) provides high performance diagnostics for the electrical systems on high performance International trucks and IC Buses. DLB Fleet displays vehicle signals in graphical and text format. This software also reads and displays vehicle diagnostic trouble codes as well as vehicle features and parameters.
Minimum Requirements
- 150MB of free hard disk space
- An Internet connection
Recommended Requirements
- Pentium 4 class process with a minimum 1 GHz of speed
- 512 MB of RAM
- 150MB of free hard disk space
- Operating System of Windows® 7 or Vista
- One or more RP1210A compatible communication devices
- Any type of high speed Internet connection
NOTE: The new version of DLB runs on Windows 10.
Recommended Adapters
- NEXIQ™ Technologies – USB-Link2
- Dearborn Group Technologies – DPA 5
- Noregon® Systems, Inc. – DLA+, DLA+ Wireless
Communication Link Drivers
- DLB uses standard RP1210A drivers for communication. The drivers are specific to the communications device and are not installed with DLB.
User Permissions
Diamond Logic Builder has different tiered permission levels allowing for more advanced use of the software.
- Level 1 (Diagnostics) – L1 is included with active product key.
- Level 2 (Diagnostics and Parameter Programming) – L2 access requires completion of web based training for each user.
- Level 3 (Diagnostics, Parameter Programming and Advanced Logic)